|
Post by thomill on Jul 9, 2012 11:20:46 GMT -8
Wasn't sure if this should go into Artwork or How-To, but since it contains the exploded parts view, people will probably use it as a reference sheet. I blew the parts diagram up on page 26 of the user manual as best I could, inverted the colors and erased the grays. I copied the numbered list from page 5 and pulled the Production / Specs from Wikipedia. I made two versions, an 11" x 17" and an 8.5" x 11" version. The former can be printed at most stores with a big xerox machine, the latter on any home printer (though I'd recommend printing the "White" version since you will quickly run out of black ink.) 11x17 black preview - link to full-sized versionI made these images in the TekMat style. They do not violate any TekMat copyrights as I did not use anything from their site nor any of their imagry. I pulled data from wikipedia (as they apparently do) and the diagrams from the SP2022 manual. If they ever sell a product similar to this with a rasterized parts diagram, I will happily remove this post. They do make a solid product so I encourage you to check if they have a gun cleaning mat for your other models: www.tekmat.com/
|
|
|
Post by thomill on Jul 9, 2012 11:21:37 GMT -8
|
|
|
Post by thomill on Jul 9, 2012 11:38:31 GMT -8
8.5 x 11 black and white previews - link to full black version - link to full white versionWhat I did with mine was have it printed at Staples on an 11" x 17" 65lb (card stock) then had the full sheet laminated. They had to trim it because the printer couldn't do it borderless. The lamination cost a few bucks as did the print (make sure they know it's black and white and NOT color) so all told it cost under $5.
|
|
|
Post by MVRK on Jul 9, 2012 12:27:40 GMT -8
This is awesome do you mind if I include this on the main website?
Sent from my HTC One X using ProBoards
|
|
|
Post by thomill on Jul 9, 2012 12:48:25 GMT -8
Go nuts. Personally, if TekMats produces a similar item, I'd take it down. Like I said, they make a great product.
I should also point out here that I do not authorize or condone the use of the images I produced in situations, not limited to, but being sold to consumers or other unauthorized usage.
|
|
|
Post by MVRK on Jul 9, 2012 13:03:02 GMT -8
I don't think it will hurt anybody if we put it up, I will just tag a little disclaimer by it stating that this was produced without the intent of being sold and is strictly listed for reference purposes.
Sent from my HTC One X using ProBoards
|
|
|
Post by SIGgybaby on Jul 9, 2012 13:55:39 GMT -8
Thanks for posting that!
|
|
|
Post by MVRK on Jul 9, 2012 15:06:29 GMT -8
I'm definitely getting this thing laminated
Sent from my HTC One X using ProBoards
|
|
|
Post by nick2022 on Jul 9, 2012 15:41:46 GMT -8
I'm definitely getting this thing laminated Sent from my HTC One X using ProBoards +1!
|
|
|
Post by frenchman on Jul 9, 2012 18:24:01 GMT -8
Invaluable info. Thank you very much, great job.
|
|
gumby
SP2022 ROOKIE
Posts: 46
|
Post by gumby on Jul 9, 2012 21:48:42 GMT -8
Invaluable info. Thank you very much, great job. +1
|
|
|
Post by MVRK on Jul 9, 2012 22:21:25 GMT -8
I put it up on the main site with a small disclaimer stating that tek mat can make me aware when they release this product and i will promptly remove it.
|
|